Rent Magni
Equipment in Canada
Magni - Italy's telehandler innovator since 2007. Rent RTH rotating telehandlers and standard TH models for Canadian construction, energy, and industrial projects.
12+
Models in Catalogue
2
Equipment Categories
19+
Years of Innovation
1
Provinces Covered
Company Overview
About Magni Headquartered in Campogalliano, Modena, Italy
Magni Telescopic Handlers emerged from Italy's engineering-rich Motor Valley - the same industrial cluster around Modena that produced Ferrari, Lamborghini, and Ducati - when the founding team launched the company in Campogalliano in 2007 with a clear mission: to build the world's best rotating telehandlers. In less than two decades, Magni has fulfilled that ambition with a product range that has earned loyal followings among contractors who discovered that a rotating telehandler can replace an entire mixed fleet of cranes, forklifts, and aerial lifts on certain project types.
The RTH (Rotating Telescopic Handler) series is the centrepiece of Magni's product philosophy. Unlike conventional telehandlers that can only pick and place in the direction the machine is facing, RTH models feature a 360-degree rotating superstructure mounted on a stabilizer-equipped carrier, allowing the operator to reach any point around the machine from a single position - precisely like a mobile crane, but with the material-handling versatility of a forklift. For Canadian construction projects where the work requires both precise crane-style picks and repetitive material transport moves, a single Magni RTH can replace two or three conventional machines, with direct savings in rental cost, operator wages, and site congestion.
Canadian energy sector projects - solar farm construction, wind turbine foundation work, oil and gas facility construction in Alberta - represent some of Magni's strongest growth markets on this side of the Atlantic. Solar panel installation in particular benefits from the RTH's ability to place panels precisely along rows without repositioning, while wind farm construction utilizes Magni heavy-lift RTH models for nacelle component staging and substation equipment positioning. The machines' stabilizer systems are designed for uneven terrain typical of Canadian greenfield energy development sites.
The standard TH telehandler series rounds out Magni's Canadian offering for applications where rotating capability is not required but reach, capacity, and Italian engineering quality are valued. Magni's cold-climate engineering has been validated in European Alpine conditions that match Canadian mountain and northern operating environments, and regional telehandler specialists across Canada have begun building Magni inventory as customer awareness of the brand's capabilities grows through word-of-mouth among contractors who have experienced the productivity benefits of the RTH firsthand.
Quick Facts
- Manufacturer
- Magni
- Founded
- 2007
- Headquarters
- Campogalliano, Modena, Italy
- Country of Origin
- Italy
- Models in Catalogue
- 12+ models
- Categories
- Aerial Lifts, Forklifts
- Canadian Dealers
- Regional telehandler specialists
Why Canada Chooses Magni
Magni in the Canadian Construction Market
European heavy equipment manufacturers are synonymous with precision engineering, advanced emissions compliance, and innovative design - attributes that align naturally with Canada's environmental standards, urban construction density, and increasing focus on sustainable infrastructure. Magni, hailing from Campogalliano, Modena, Italy, brings a tradition of engineering excellence that has been validated across the most demanding construction environments on multiple continents.
Canadian infrastructure projects - from LRT expansions in Calgary and Edmonton to highway twinning through the Fraser Canyon - demand machines capable of both high production rates and controlled precision. Magni's fleet excels in exactly these contexts. Their advanced load management systems, telematics integration, and Stage V emissions compliance position them as natural partners for municipalities and major contractors navigating increasingly strict environmental regulations.
In colder regions, Magni's European-grade cold-weather packages - including hydraulic oil pre-heat systems, battery management, and insulated engine compartments - ensure reliable starts and peak performance in sub-zero conditions across the Canadian north and interior. These are not afterthought additions; they are engineered from the factory for cold-climate operation.
Renting Magni equipment through HeavyRentals.ca gives you access to owner-maintained machines from across Canada. Our platform's verified owner network means every Magni unit listed has been maintained to the standards that protect your production and your crew's safety. Daily, weekly, and monthly rental options give you the flexibility to scale your fleet to project demands - with no long-term capital commitment.
European Precision Engineering
Manufactured to the highest European quality standards with rigorous testing protocols.
Stage V Emissions
Meets the strictest emissions standards, aligning with Canadian environmental requirements.
Innovative Design
Leading-edge cab ergonomics, safety systems, and operator assistance technology.
Cold-Weather Ready
Factory-installed cold-climate packages standard on machines for the Canadian market.
Canadian Job Sites
Where Magni Equipment Performs Across Canada
Urban Infill & Residential
Tight access, noise restrictions, and proximity to existing structures define urban construction in Canadian cities. Compact equipment excels where larger machines simply cannot operate.
Landscaping & Site Prep
From residential landscaping to commercial site preparation across Canada's suburbs, compact loaders and skid steers are the workhorses of smaller-scale earthmoving.
Utilities & Infrastructure
Municipal utility work - water main replacement, storm drain installation, and road cuts - frequently requires equipment small enough to work in live traffic corridors and tight rights-of-way.
Cold-Weather Readiness
Canada's winters test every piece of machinery. Temperatures in northern and central Canada regularly drop below -30°C, with extreme cold snaps reaching -50°C with windchill in some regions. Magni equipment is built to start, operate, and maintain full productivity in these conditions - with hydraulic systems, engine cooling, and electrical systems engineered for extreme cold as a standard expectation, not an afterthought. On HeavyRentals.ca, Canadian Magni owners maintain their machines with winter-grade fluids and cold-climate service packages so you get equipment that performs when temperatures plunge.
Regulatory Compliance
Canada's provincial and federal construction regulations set rigorous standards for equipment safety, emissions, and operator protection. Magni machines certified for the Canadian market meet Transport Canada, CSA, and provincial WorkSafe regulations out of the factory. This compliance infrastructure gives contractors the confidence to deploy rented equipment on government contracts, municipal projects, and safety-audited job sites without modification or variance requests. When you rent Magni through HeavyRentals.ca, you're getting market-certified equipment from verified Canadian owners.
Full Fleet Overview
Magni Equipment Categories
12 models across 2 categories - all available to rent on HeavyRentals.ca from verified Canadian owners.
Aerial Lifts
9 models148
Max HP
29K
Max lbs
Forklifts
3 models109
Max HP
19K
Max lbs
Featured Machines
Top Magni Models on HeavyRentals
Highlighted models from our Magni catalogue - selected for their performance specifications and popularity among Canadian contractors.
148
Horsepower
26K
Weight (lbs)
diesel
Fuel Type
Typical Rental Rates
$560
Daily
$1,900
Weekly
$4,950
Monthly
148
Horsepower
32K
Weight (lbs)
diesel
Fuel Type
Typical Rental Rates
$660
Daily
$2,250
Weekly
$5,850
Monthly
80
Horsepower
15K
Weight (lbs)
diesel
Fuel Type
Typical Rental Rates
$360
Daily
$1,220
Weekly
$3,180
Monthly
Rental rates shown are typical market ranges based on our Canadian pricing database. Actual rates on HeavyRentals.ca may vary based on owner pricing, condition, location, and seasonal demand.
Rental Advantage
Why Rent Magni Instead of Buying?
Zero Depreciation
New heavy equipment depreciates 20-30% in its first year. Renting means you pay only for utilization - no balance sheet liability, no residual value risk on your fleet.
Right Machine Every Job
Different projects need different equipment configurations. Renting from HeavyRentals.ca means you can spec the exact Magni model for the task - not make do with what you own.
No Maintenance Overhead
When you rent, maintenance is the owner's responsibility. Skip the dealer relationship management, service scheduling, and parts inventory that comes with ownership.
Scale With Your Pipeline
Whether you have one project or twelve running simultaneously, a rental approach scales your fleet instantly - add machines when busy, return them when idle. No fixed costs.
Magni Rental for Canadian Projects
Canada's project-based construction economy - driven by short paving and building seasons, annual municipal budget cycles, and the boom-bust nature of resource extraction - is structurally well-suited to equipment rental. Contractors who rent their Magni fleet through HeavyRentals.ca maintain the flexibility to scale operations seasonally without the long-term overhead of ownership.
For smaller contractors, municipalities, and first-time operators, renting also provides access to higher-specification Magni machines than their capital budget could support through purchase. A tier-one excavator or high-capacity crane that would be unattainable as a purchase becomes an accessible weekly rental for a specific project phase.
Magni maintains an established Canadian dealer network through Regional telehandler specialists, ensuring parts and factory support are available in every major market - adding an additional layer of confidence when renting Magni equipment from verified owners on our platform.
10
Provinces Served
12+
Magni Models
24/7
Platform Access
$0
Listing Deposit
Where It's Needed Most
Regional Demand for Magni Across Canada
Magni Rentals in Ontario
As Canada's most populous province, Ontario hosts the country's largest concentration of construction activity. Infrastructure investment in transit, highways, and housing creates a deep rental market for Magni equipment across the province year-round.
Browse Ontario Equipment →Find Magni Equipment Rental Near You
HeavyRentals.ca is Canada's trusted peer-to-peer heavy equipment rental marketplace, connecting contractors, municipalities, and operators with verified equipment owners from coast to coast. If you're searching for magni telehandler rental Canada, you've found the right platform.
Whether you need magni rotating telehandler rental or magni RTH rental Canada, our growing network of Canadian equipment owners has Magni machines available across all provinces. Search by location, category, or date range to find the right machine for your project timeline.
All Magni equipment listed on HeavyRentals.ca comes from verified Canadian owners who maintain their machines to manufacturer standards. Our platform-generated rental agreements, secure messaging, and transparent pricing make renting heavy equipment in Canada as straightforward as it should be.
Get Started Today
Rent Magni Equipment
Anywhere in Canada
Browse verified Magni listings from Canadian equipment owners. No middlemen, no markup - just straightforward equipment access with a platform-backed rental agreement.